230V 1.8-4.6A 400W Electronic UV Tube Ballast Dip-Switching
230V 1.8-4.6A 400W Electronic UV Tube Ballast Dip-Switching
Product Parameters for this 400W Ballast of UV Sterilizert
| Start Mode | Preheat Start |
Operating Voltage Range | 198-264 |
Max Input Power | 425W |
Max Input Current | 1.89A @ 230V |
Lamp Power | 400W Amalgam UV Lamp |
Lamp Current | 1.8-4.6A |
Operating Frequency | 40-70KHZ |
Preheat Time | 7-9 S |
Preheat Current | 2.5-3.1A |
Power Factor | ≥ 0.98 |
Efficiency | >90% |
Total Harmonic Distortion | <15% |
Crest Factor | <1.7 |
Ambient Humidity | 5%-85% |
Ambient Temperature | -15-40℃ |
Max Case Temperature | 70℃ |
Case Material | Aluminum Shell |
Safety Norm | EN61347-1-2-3, EN62493 |
LVD Norm | Low voltage Directive 2014/35/EU |
EMC Norm | EN55015, EN55014, GB17743, GB17625, EN61000-3-2 |
Certificates | CE/UL/CCC |
Product Features for Ballast UV Lamp
1> This 400W uv water system replace ballast, is with high power factor. energy efficient.Less energy waste.
2> This 400W uv lamp ballast is with worldwide universal voltage, can work with 110V and 230V input.
3> This ballast of uv sterilizer with reliable quality, less than 0.3% repair rate,within warranty.
4> We offer OEM and ODM service for this uv tube ballast.
Dimension for This UV Tube Ballast
Size: 250*95*45mm Carton Size: 460*270*190mm(12PCS Load)
UV Lamp Ballast Circuit
Dip-switching Diagram
Loading Lamps:
GPHHA843T6,GPHHA1000T6, GPHHA1554T6,GPHHA357T6,TUV325WXPT, NNI300/147XL, NNI200/147XL,
NNI400/147XL,UVL200WT8, UVL300WT8
Cautions:
1. Please make sure the power is off when you install or maintain the ballast
2. The distance between ballast and lamp tube should no longer than 5M.
3. The suggested wire specific: diameter 0.5-1mm, wire stripping 0.8-1mm
4. The aluminum shell should be grounded.
Why US for the amalgam uv lamp ballast?
