110/230V 105W 1.2A Electronic Ballast for Amalgam UV Lamps
110/230V 105W 1.2A Electronic Ballast for Amalgam UV Lamps
Product Parameters for this 105W Amalgam UV Lamp Ballast
| Start Mode | Pre-heat Start |
Operating Voltage Range | 99-264 |
Max Input Power | 119W |
Max Input Current | 0.53A @ 230V , 1.1@110V |
Lamp Power | 105W Amalgam UV Lamp |
Lamp Current | 0.75-0.85A |
Operating Frequency | 40-70KHZ |
Preheat Time | 7.0-9.0 S |
Preheat Current | 1.2-1.6A |
Power Factor | ≥ 0.98 |
Efficiency | >90% |
Total Harmonic Distortion | <15% |
Crest Factor | <1.7 |
Ambient Humidity | 5%-85% |
Ambient Temperature | -15-40℃ |
Max Case Temperature | 70℃ |
Case Material | Aluminum Shell |
Safety Norm | EN61347-1-2-3, EN62493 |
LVD Norm | Low voltage Directive 2014/35/EU |
EMC Norm | EN55015, EN55014, GB17743, GB17625, EN61000-3-2 |
Certificates | CE/UL/CCC |
Product Features for Electronic uv-c lamp ballast:
1> This 105W electronic ballast for amalgam uv lamps, is with high power factor. energy efficient.
2> This amalgam uv lamp ballast is with worldwide universal voltage, can work with 110V and 230V input.
3> Reliable quality, less than 0.3% repair rate,within warranty.
4> We offer OEM and ODM service for this uv-c lamp ballast .
Dimension for this 105W Amalgam UV Lamp Ballast
Size: 185*56*38mm Carton Size: 460*270*190mm(27PCS load)
Wiring Diagram for this ballast for uv light
Wiring diagram A 1 Lamp: GPHA843T5
Wiring Diagram B 2 Lamps: GPHA357T5
Cautions:
1. Please make sure the power is off when you install or maintain the ballast
2. The distance between ballast and lamp tube should no longer than 5M.
3. The suggested wire specific: diameter 0.5-1mm, wire stripping 0.8-1mm
4. The aluminum shell should be grounded.
